{"product_id":"ferrum-hypsos-hybrid-dc-power-supply","title":"Ferrum HYPSOS Hybrid DC Power Supply","description":"\u003ch1\u003e\u003cstrong\u003e5–30V DC power supply\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eThe Ferrum HYPSOS is an adjustable DC power supply for compatible DACs, headphone amplifiers, preamps, phono stages, and other audio components. Its hybrid design combines switching regulation with a low-noise linear output stage, while four-wire sensing maintains the selected voltage at your component’s power input. A 5–30V output range, selectable polarity, and fine voltage adjustment let HYPSOS serve a wide range of devices.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eHybrid regulation for clean, stable power\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe HYPSOS pairs an efficient switching supply with a custom low-dropout linear regulator. The switching stage operates at a nominal 1MHz and feeds the linear stage through additional filtering. The final regulator maintains the output voltage with less than 1V between its input and output, reducing heat dissipation while providing low-noise power and a fast response to changing current demands.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eVoltage measured where your component receives it\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eA power cable’s resistance can cause voltage to drop as a component draws more current. Ferrum’s 4T sensing uses two conductors to deliver power and two to measure voltage at the connected device. This feedback allows HYPSOS to compensate for cable resistance and maintain the selected voltage at the component’s DC input. The included low-inductance Canare cable also helps the supply respond to rapid changes in current demand.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eAdjustable output for compatible audio components\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe HYPSOS provides continuously adjustable output from 5V to 30V, with up to 6A of continuous current subject to its 80W continuous power limit. Preconfigured device profiles simplify voltage selection for supported products. Manual configuration lets you specify voltage and polarity for other compatible components, provided their connector and power requirements match the supply.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFine voltage adjustment with Sweet Spot Tuning\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eSweet Spot Tuning lets you adjust output voltage in 0.1V steps to explore how a compatible component responds to changes in its supply voltage. Device profiles use the manufacturer’s permissible voltage range when available. Otherwise, HYPSOS provides adjustment within ±5% of the nominal setting. Any adjustment should remain within the connected component’s specified operating range.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSpread spectrum control for switching noise\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eSpread Spectrum Mode varies the switching frequency by 20% of its nominal value. This distributes switching noise across a broader frequency range, reducing the magnitude of individual noise peaks and harmonics. The mode can be enabled or disabled through the HYPSOS controls.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFiltering from the mains inlet to the output\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eA two-stage filter at the IEC inlet attenuates incoming power-line noise. Additional filters before and after the switching stage help contain switching interference, while the final linear regulator provides further ripple rejection. Together, these stages reduce disturbances that could reach the powered component.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eAutomatic mains adjustment and selectable DC polarity\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eAutomatic Transformer Voltage Adjust configures the transformer for incoming 115V or 230V mains at startup. Electronic Output Voltage Polarity Switch lets you select the DC polarity required by your component without a separate polarity adapter.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003ePower control that fits your system\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe HYPSOS supports compatible Apple TV remotes and trigger input\/output connections for coordinated power control. Its standby automation can also operate without a dedicated trigger connection, giving you several ways to integrate power switching into your audio system.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eProtection that monitors the load\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eA microprocessor monitors output voltage, current, and delivered power. Overcurrent, overvoltage, and short-circuit protection help safeguard the supply and connected equipment. HYPSOS supports brief current peaks up to 9A, while continuous operation remains governed by its 6A current ceiling and 80W power limit.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct highlights\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHybrid switching and linear DC power supply\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdjustable 5–30V output\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4T remote sensing at the connected component’s DC input\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow-inductance four-conductor Canare power cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSweet Spot Tuning with 0.1V adjustment steps\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSelectable Spread Spectrum Mode\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePreconfigured device profiles and manual configuration\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eElectronic DC polarity selection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAutomatic transformer adjustment for 115V and 230V mains\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eApple TV remote compatibility and trigger input\/output\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOvercurrent, overvoltage, and short-circuit protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: Hybrid DC power supply\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput voltage range: 5–30V DC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum continuous output power: 80W\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum continuous output current: 6A, subject to the 80W power limit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eContinuous current limit above approximately 13.3V: 80W divided by the selected output voltage\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum pulse output current: 9A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum pulse output power: 270W at 30V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoltage tuning increment: 0.1V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSweet Spot Tuning range: Manufacturer-specified range where available, otherwise ±5% of nominal voltage\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNominal switching frequency: 1MHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpread spectrum modulation: 20% of nominal switching frequency\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoltage sensing: Four-wire remote sensing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDC output polarity: Electronically selectable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMains transformer configuration: Automatic selection for 115V or 230V operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded DC cable length: Approximately 1.64 ft (0.5m)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eManufacturer warranty: 3 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eWhat’s included\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFerrum HYPSOS hybrid DC power supply\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eApproximately 1.64 ft (0.5m) DC power cable with connector fitted to order\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpare fuses\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ferrum","offers":[{"title":"2.1mm","offer_id":67735413096684,"sku":"APS-1454-1","price":1500.0,"currency_code":"USD","in_stock":true},{"title":"2.5mm","offer_id":67735413129452,"sku":"APS-1454-2","price":1500.0,"currency_code":"USD","in_stock":true},{"title":"FPL","offer_id":67735413162220,"sku":"APS-1454-3","price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0225\/2721\/3642\/files\/IMG_5336-res.jpg?v=1792003227","url":"https:\/\/apos.audio\/products\/ferrum-hypsos-hybrid-dc-power-supply","provider":"Apos","version":"1.0","type":"link"}