Shanling
Shanling M0 Digital Audio Player
$108.99
The Shanling M0 Digital Audio Player is a hi-res audio player that comes with the ESS Sabre ES9218P DAC chip. This DAP uses two-way Bluetooth with aptX, which means it can transmit to a speaker via Bluetooth 4.0 or receive data from a smartphone to act as a Bluetooth DAC/amp unit.
Specs:
-
Size: 40 x 135 x 45mm
-
Screen: 1.54 inch 240 x 240 high definition touch screen
-
Weight: 33 g
-
DAC Model: ESS Sabre ES9218P
-
Battery Life: 15 hours (depending on the use)
-
Deep Standby: 30 days (depending on the situation)
-
Charging Time: 2 hours (depending on the use)
-
Battery Capacity: 640mAH lithium battery
-
Storage: 512G TF Card (to buy)
-
Output Port: 3.5 mm
-
Output Power: 80 mW @ 32 Ohm
-
Output Impedance: 0.16 Ohm
-
Channel Separation Degree: 70 dB
-
Recommended Earphone Impedance: 8 - 300 Ohm
-
Frequency Effect: 20 Hz - 20 kHz (-0.5 dB)
-
Distortion: 0.004% (A-Weighting, output 500 mV)
-
Signal to Noise Ratio: 118 dB (A-Weighting)
-
Bottom Noise: <3uV (High Gain)
-
Dynamic Range: >105 dB
-
Sampling Rate: up to 384 kHz / 32 bit, DSD 128
- Size: 40 x 135 x 45mm
- Screen: 1.54 inch 240 x 240 high definition touch screen
- Weight: 33 g
- DAC Model: ESS Sabre ES9218P
- Battery Life: 15 hours (depending on the use)
- Deep Standby: 30 days (depending on the situation)
- Charging Time: 2 hours (depending on the use)
- Battery Capacity: 640mAH lithium battery
- Storage: 512G TF Card (to buy)
- Output Port: 3.5 mm
- Output Power: 80 mW @ 32 Ohm
- Output Impedance: 0.16 Ohm
- Channel Separation Degree: 70 dB
- Recommended Earphone Impedance: 8 - 300 Ohm
- Frequency Effect: 20 Hz - 20 kHz (-0.5 dB)
- Distortion: 0.004% (A-Weighting, output 500 mV)
- Signal to Noise Ratio: 118 dB (A-Weighting)
- Bottom Noise: <3uV (High Gain)
- Dynamic Range: >105 dB
- Sampling Rate: up to 384 kHz / 32 bit, DSD 128