Apos Audio TOPPING Headphone Amp TOPPING A30 Pro Desktop Headphone Amp

TOPPING

TOPPING A30 Pro Desktop Headphone Amp

Name: TOPPING A30 Pro Desktop Headphone Amp
Brand: TOPPING
Price: 249.00 USD
Availability: OutOfStock

$249 $349

Dang it.

This product has been discontinued.

Power, performance, and practical new features

Boasting six times the power, double the inputs, and massive gains in SNR and THD+N over the original (not to mention some practical new features), the A30 Pro is an excellent choice for the modern music lover looking for an amp that can do it all.

Six watts per channel

The TOPPING A30 Pro outputs 6,000 milliwatts per channel at 16Ω, 5,500 milliwatts per channel at 32Ω, and 840mw per channel at 300Ω. With can-rattling wattage like that, it can easily power notoriously hard-to-drive full-size headphones like the Sennheiser HD 660 S and the Beyerdynamic DT1990 Pro.

145dB dynamic range

Thanks to its NFCA-based circuit and UHGF (ultra high gain feedback) technology, the A30 Pro delivers a stunning 145dB of dynamic range. This means that 145dB exists between the lowest and highest volumes of sound it can reproduce, resulting in exceptionally realistic playback.

Say goodbye to ground loop noise

When multiple pieces of equipment are used in conjunction, ground loop noise can occur. Ground loop noise most often manifests as a buzzing or humming sound, which is capable of being loud enough to damage speakers. Although it's known to happen most often in single-ended feeds, it can happen in balanced feeds, too.

The A30 Pro solves this issue with a GND/LIFT switch. When in normal use, set the switch to GND. If you encounter ground loop noise, set the switch to LIFT, which will change the ground point of the A30 Pro from its chassis to the equipment it’s connected to, eliminating the noise.

Single-ended and balanced input passthrough

When powered down, the A30 Pro passes the input signal directly through to RCA or TRS without applying amplification. This allows you to connect active monitors to the A30 Pro and get the benefits of an outboard DAC without introducing another amp into the chain.

Three-step gain switch

A three-step gain switch adapts the A30 Pro to the huge sensitivity gap between IEMs and full-size headphones. From -14dB on the low setting to +14dB on the high setting, the function spans an impressive 28dB.

Made to pair with the D30 Pro Desktop DAC

The A30 Pro and D30 Pro share the same spatial dimensions, making them easily stackable. At a combined 4” of height, they’re modest enough to fit under a monitor, in a desk compartment, or on a space-restricted shelf. Get them in black, silver, or mix and match for a more eye-catching dynamic.

Product highlights

6W x 2 @ 16Ω output power
Bypass output when power off
Balanced input/output
3 Outputs: 4-pin XLR, 4.4mm, 6.35mm
THD+N: <0.00006%
Noise: <0.3uVrms
Power: 100-240VAC 50Hz/60Hz
Gain switch: Low (-14dB), Medium (0dB), High (+14dB)
3 Inputs: XLR (L+R), RCA (L+R)
Passthrough outputs: 6.35mm TRS (L+R), RCA (L+R)
Power consumption: <9W
Output power:

6W x2 @ 16Ω THD+N <0.1%
5,500mW x2 @ 32Ω THD+N <0.1%
840mW x2 @300Ω THD+N <0.1%

THD+N @1kHz A-wt

SE IN: <0.00007% @ 3.5W (32Ω), <0.00006% @ 90mW (300Ω)
BAL IN: <0.00007% @ 3.2W (32Ω), <0.00006% @ 86mW (300Ω)

THD @ 20-20,000Hz 90kBW

SE IN: <0.00008% @ 760mW (32Ω), <0.00007% @ 81mW (300Ω)
BAL IN: <0.00008% @ 760mW (32Ω), <0.00007% @ 81mW (300Ω)

SNR @ MAX OUT 1kHz A-wt

SE IN: 145dB
BAL IN: 140dB

SNR @50mV OUT 1kHz

SE IN: 104dB
BAL IN: 104dB

Dynamic range @1kHz A-wt

SE IN: 145dB
BAL IN: 140dB

Frequency response

SE IN: 20-40,000Hz (±0.05dB)
BAL IN: 20-40,000Hz (±0.1dB)

Output level

SE IN: 34Vpp @ low gain, 34Vpp @ medium gain, 45Vpp @ high gain
BAL IN: 6.6Vpp @ low gain, 34Vpp @ medium gain, 45Vpp @ high gain

AP measured noise level @A-wt

SE IN: <0.7uVrms @ low gain, 0.7uVrms @ medium gain, 1.2 uVrms @ high gain
BAL IN: <0.7uVrms @ low gain, <0.7uVrms @ medium gain, <1.2 uVrms @ high gain

Actual noise level

SE IN: <0.3uVrms @ low gain, <0.3uVrms @ medium gain, <0.9uVrms @ high gain
BAL IN: <0.3uVrms @ low gain, <0.3uVrms @ medium gain, <1.1uVrms @ high gain

Channel crosstalk @1kHz

SE IN: -106dB
BAL IN: -101dB

IMD CCIF @(18kHz+19kHz)

SE IN: -116dB
BAL IN: -116dB

IMD SMPTE @(60Hz+7kHz)

SE IN: -110dB@SMPTE4: 1, -115dB@SMPTE1: 1
BAL IN: -110dB@SMPTE4: 1, -116dB@SMPTE1: 1

Input sensitivity

SE IN: 60Vrms @ low gain, 12.6Vrms @ medium gain, 2.7Vrms @ high gain
BAL IN: 12.7Vrms @ low gain, 12.7Vrms @ medium gain, 2.7Vrms @ high gain

Gain

SE IN: -14dB @ low gain, 0dB @ medium gain, 14dB @ high gain
BAL IN: -14dB @ low gain, 0dB @ medium gain, 14dB @ high gain

Output impedance

SE IN: <0.1Ω
BAL IN: <0.1Ω

Adapter impedance: >8Ω
Manufacturer’s note: The actual noise level is obtained by boosting the noise of the A30 Pro by 40dB using a low noise amplifier in front of the APx555B and then dividing the measured noise by 100 times.
Weight: 1.9lbs (870g)
Dimensions: 6.85 x 5.4 x 1.7” (17.4 x 13.8 x 4.5cm)