FiiO

FiiO BTR5 Portable Hi-Fi Bluetooth DAC/Amp

$109.99

Request A Price Match


Boasting over twice the output power of the BTR3K as well as a beefier battery and clock, the FiiO BTR5 is a bluetooth DAC/amp to be reckoned with. 


Portable is an Understatement

The BTR5 is small. Like, just barely win a height contest to a golf tee small. Share a weight class with a toothbrush small. At 2.8” on its longest side and weighing just over an ounce, the BTR5 can share a pocket with your phone, and you might not even notice it. 


The Double DAC

Don’t let its humble dimensions fool you; the BTR5 packs a punch. Its two ESS SABRE ES9218P digital-to-analog converters (DACs) output 220mW balanced power against a jet-black sonic background: -122dB SNR (signal-to-noise ratio). 


Balanced Out

The BTR5’s DACs and amps are paired for left and right channels, meaning greater separation and purer sound piped to your balanced headphones. 


State-of-the Art Bluetooth 5.0 

Gone are the days of lousy bluetooth downsampling. Boasting Qualcomm’s flagship Bluetooth 5.0 chip, the CSR 8675, the BTR3K supports 24-bit transmission of lossless codecs: AAC, SBC, aptX, aptX LL, aptX HD, and LDAC. So ditch the wires but keep the quality. 


Independent Dual Crystal Oscillators 

If you’re going to decode massive 24-bit lossless codecs, you better have a plan for reproducing them accurately. Fortunately, the BTR5 includes dual crystal oscillators. These 45.1584/49.152 crystals eliminate jitter for a super stable sonic experience. 


One Button to Rule Them All

An easy-to-reach multi-function button lets you execute an array of tasks from pairing and playing to pausing and accepting a call. 


Specs


  • Bluetooth Profile: HFP, HSP, A2DP, and AVRCP

  • Bluetooth Version: 5.0

  • Supported Audio Formats / Codecs: SBC, AAC, aptX, aptX LL, aptX HD, and LDAC

  • Chipset

    • Bluetooth: CSR8675

    • DAC and Amp: 2 x ES9218P

    • USB DAC Chip: XMOS XUF208

  • USB DAC: Sampling Rate: Supported up to 384 kHz / 32-Bit and DSD 64/128/256

  • THD+N

    • 3.5mm Output: ≤0.004%

    • 2.5mm Balanced Output: ≤0.002%

  • SNR

    • PO: ≥118 dB (32 Ohms A-Weighted)

    • BAL: ≥122 dB (32 Ohms A-Weighted)

  • Transmission Distance: 32.8' (10m) (Open Areas)

  • Channel Balance: ≤0.1dB

  • Gain: Supported (High/Low)

  • Display: 0.5" (12.7mm), 64 x 32 pixel OLED

  • Controls:

    • Multi-Function Button: Pairing, Play, Pause, Accept Call, Hang Up, Cancel, Force Pair, Open Voice Assistant

    • Volume Button

    • Power Button

  • Headphone Output

    • 1 x 1/8" / 3.5 mm (PO)

    • 1 x 2.5 mm (Balanced)

  • Output Power

    • PO: About 80 mW (32 Ohms Loaded)

    • PO: About 90 mW (16 Ohms Loaded)

    • BAL: About 240 mW (32 Ohms Loaded)

    • BAL: About 240 mW (16 Ohms Loaded)

  • Output Impedance

    • PO: ≤1.0 Ohms (32 Ohms Loaded)

    • BAL: ≤2.0 Ohms (32 Ohms Loaded)

  • Amplitude

    • PO: 1.6 V (32 Ohms / THD+N PO: 1.8 V (No Loaded)

    • BAL: 2.8 V (32 Ohms / THD+N BAL: 3.6 V (No Loaded)

  • Frequency Response

    • 20Hz to 20kHz (aptX Connection)

    • 20Hz to 40kHz (LDAC Connection)

  • Drive Ability

    • 16 to 100Ω (PO)

    • 16 to 150Ω (BAL)

  • Crosstalk

    • PO: ≥79dB (1 kHz, 32Ω Loaded)

    • PO: ≥95dB (1 kHz, No Loaded)

    • BAL: ≥118dB (1 kHz, 32Ω Loaded)

    • BAL: ≥119dB (1 kHz, No Loaded)

  • USB Port: USB Type-C

  • Power Input: Recommended 5 VDC, 500 mA

  • Battery Capacity: 550mAh

  • Run Time

    • 3.5 mm: About 9 Hours

    • 2.5 mm: About 7 Hours (AAC)

  • Charging Time: ≤1.5 Hours

  • Dimensions: 2.8 x 1.3 x 0.4" (72 x 32 x 11mm) (Excluding Back Clip)

  • Weight: 1.5oz (43.7g)


Packaging Info

  • Package Weight: 0.36 lb (163g)

  • Box Dimensions (LxWxH): 5.9 x 3.7 x 1.1" (14.9 x 9.3 x 2.7cm)


Apos Promise



Recently viewed