FiiO
FiiO BTR5 Portable Hi-Fi Bluetooth DAC/Amp
Boasting over twice the output power of the BTR3K as well as a beefier battery and clock, the FiiO BTR5 is a bluetooth DAC/amp to be reckoned with.
Portable is an Understatement
The BTR5 is small. Like, just barely win a height contest to a golf tee small. Share a weight class with a toothbrush small. At 2.8” on its longest side and weighing just over an ounce, the BTR5 can share a pocket with your phone, and you might not even notice it.
The Double DAC
Don’t let its humble dimensions fool you; the BTR5 packs a punch. Its two ESS SABRE ES9218P digital-to-analog converters (DACs) output 220mW balanced power against a jet-black sonic background: -122dB SNR (signal-to-noise ratio).
Balanced Out
The BTR5’s DACs and amps are paired for left and right channels, meaning greater separation and purer sound piped to your balanced headphones.
State-of-the Art Bluetooth 5.0
Gone are the days of lousy bluetooth downsampling. Boasting Qualcomm’s flagship Bluetooth 5.0 chip, the CSR 8675, the BTR3K supports 24-bit transmission of lossless codecs: AAC, SBC, aptX, aptX LL, aptX HD, and LDAC. So ditch the wires but keep the quality.
Independent Dual Crystal Oscillators
If you’re going to decode massive 24-bit lossless codecs, you better have a plan for reproducing them accurately. Fortunately, the BTR5 includes dual crystal oscillators. These 45.1584/49.152 crystals eliminate jitter for a super stable sonic experience.
One Button to Rule Them All
An easy-to-reach multi-function button lets you execute an array of tasks from pairing and playing to pausing and accepting a call.
Specs
Bluetooth Profile: HFP, HSP, A2DP, and AVRCP
Bluetooth Version: 5.0
Supported Audio Formats / Codecs: SBC, AAC, aptX, aptX LL, aptX HD, and LDAC
Chipset
Bluetooth: CSR8675
DAC and Amp: 2 x ES9218P
USB DAC Chip: XMOS XUF208
USB DAC: Sampling Rate: Supported up to 384 kHz / 32-Bit and DSD 64/128/256
THD+N
3.5mm Output: ≤0.004%
2.5mm Balanced Output: ≤0.002%
SNR
PO: ≥118 dB (32 Ohms A-Weighted)
BAL: ≥122 dB (32 Ohms A-Weighted)
Transmission Distance: 32.8' (10m) (Open Areas)
Channel Balance: ≤0.1dB
Gain: Supported (High/Low)
Display: 0.5" (12.7mm), 64 x 32 pixel OLED
Controls:
Multi-Function Button: Pairing, Play, Pause, Accept Call, Hang Up, Cancel, Force Pair, Open Voice Assistant
Volume Button
Power Button
Headphone Output
1 x 1/8" / 3.5 mm (PO)
1 x 2.5 mm (Balanced)
Output Power
PO: About 80 mW (32 Ohms Loaded)
PO: About 90 mW (16 Ohms Loaded)
BAL: About 240 mW (32 Ohms Loaded)
BAL: About 240 mW (16 Ohms Loaded)
Output Impedance
PO: ≤1.0 Ohms (32 Ohms Loaded)
BAL: ≤2.0 Ohms (32 Ohms Loaded)
Amplitude
PO: 1.6 V (32 Ohms / THD+N PO: 1.8 V (No Loaded)
BAL: 2.8 V (32 Ohms / THD+N BAL: 3.6 V (No Loaded)
Frequency Response
20Hz to 20kHz (aptX Connection)
20Hz to 40kHz (LDAC Connection)
Drive Ability
16 to 100Ω (PO)
16 to 150Ω (BAL)
Crosstalk
PO: ≥79dB (1 kHz, 32Ω Loaded)
PO: ≥95dB (1 kHz, No Loaded)
BAL: ≥118dB (1 kHz, 32Ω Loaded)
BAL: ≥119dB (1 kHz, No Loaded)
USB Port: USB Type-C
Power Input: Recommended 5 VDC, 500 mA
Battery Capacity: 550mAh
Run Time
3.5 mm: About 9 Hours
2.5 mm: About 7 Hours (AAC)
Charging Time: ≤1.5 Hours
Dimensions: 2.8 x 1.3 x 0.4" (72 x 32 x 11mm) (Excluding Back Clip)
-
Weight: 1.5oz (43.7g)
Packaging Info
Package Weight: 0.36 lb (163g)
Box Dimensions (LxWxH): 5.9 x 3.7 x 1.1" (14.9 x 9.3 x 2.7cm)