Skip to content

Cart

Your cart is empty

FiiO BTR25 Portable DAC/Amp

Sale price$109.99 USD
Material:

three-mode Balanced DAC and amplifier

The FiiO BTR25 brings Bluetooth connectivity, USB decoding, and headphone amplification to your wired headphones. A Qualcomm QCC3095 Bluetooth chip supports aptX Lossless, LDAC, and LE Audio, while an ESS ES9069Q DAC and two ES9603Q headphone amplifiers deliver up to 460mW per channel into 32Ω through the balanced output. Three operating modes let you move between your computer, phone, and Bluetooth sources, with a color display and physical controls keeping adjustments close at hand.

Wireless listening with your wired headphones

Keep using the earphones you like while adding wireless connectivity. The QCC3095 combines Bluetooth 6.2 with dual 240MHz Kalimba audio DSPs and support for Snapdragon Sound. Choose from aptX Lossless, aptX Adaptive, aptX HD, LDAC, and other supported codecs to match your source device. Available codecs and lossless operation depend on the transmitting device and connection conditions.

Dedicated ESS decoding and amplification

An ES9069Q DAC handles digital-to-analog conversion, with two high-current ES9603Q headphone amplifiers providing the drive. This fully differential architecture separates decoding from amplification and supports low noise and distortion across both headphone outputs. Use the 3.5mm single-ended jack or connect a compatible balanced cable to the 4.4mm output.

Designed for low-impedance earphones

Multi-driver earphones can change their tonal balance when paired with a source that has a high output impedance. The BTR25 keeps output impedance below 0.3Ω to help preserve your earphones’ intended response. High-current amplification, LDO voltage regulation, and independently regulated power sections support low-impedance loads, with balanced output reaching 570mW per channel into 16Ω.

Three modes for everyday sources

A three-position switch selects how the BTR25 connects and draws power. PC mode turns it into a computer-powered USB DAC and headphone amplifier. BT mode uses the internal battery for wireless listening and allows charging when USB is connected. PHONE mode connects to a phone or tablet over USB, with the internal battery helping reduce the power drawn from your mobile device. Both USB modes support PCM up to 384kHz/32-bit and native DSD256.

More listening between charges

Battery life reaches up to 10 hours with SBC Bluetooth through the single-ended output, or up to 9 hours through the balanced output. LDAC playback provides up to 8.5 hours through either output. In PHONE mode, runtime reaches up to 11 hours. Charging takes 1.5 hours or less. These figures come from FiiO laboratory testing—actual runtime varies with listening conditions and use.

Track information at a glance

The 1.3-inch (3.3cm) color IPS display shows playback information and operating status, with song information available in Bluetooth mode. Check what’s playing or review settings while the BTR25 is clipped to your clothing or positioned beside your phone.

Fine-tune wired and wireless playback

Global 10-band parametric EQ lets you adjust frequency, gain, and bandwidth through the FiiO Control app or web interface. Shape bass levels, adjust vocal presence, or tailor the response to a particular pair of headphones. PEQ works with all supported Bluetooth formats and with PCM sample rates up to 384kHz in PC and PHONE modes.

Physical controls in an aluminum body

A faceted aluminum-alloy chassis and two-part front panel give the BTR25 a comfortable shape for handheld use. Rotate the volume knob for level adjustments, press it for playback and call controls, or use the dedicated track buttons. Choose between two volume adjustment curves and 60 or 120 volume steps. FiiO rates the knob for more than 100,000 presses and 100,000 full rotations based on laboratory testing.

A detachable clip for portable listening

The detachable magnetic clip secures the BTR25 to your collar or clothing for Bluetooth listening. Remove it when you prefer a slimmer profile alongside your phone. The BTR25 comes in Black, Retro Gold, and Gradient Green.

Gaming, calls, and car audio

Gaming mode supports devices such as Switch and PS5, along with USB microphone operation for voice chat. A built-in microphone and support for CTIA-compatible inline microphones through the 3.5mm jack add options for calls. Car mode allows the BTR25 to power on and off with your vehicle, and simultaneous connection to two phones makes switching between mobile sources more convenient.

Protection and ongoing updates

Temperature monitoring and output DC detection help protect the device and connected headphones. An adjustable maximum volume lets you set an output limit. Firmware updates are available through USB or Bluetooth OTA.

Product highlights

  • Qualcomm QCC3095 with Bluetooth 6.2
  • aptX Lossless, LDAC, Snapdragon Sound, and LE Audio support
  • ESS ES9069Q DAC with two ES9603Q headphone amplifiers
  • 3.5mm single-ended and 4.4mm balanced headphone outputs
  • Up to 460mW per channel into 32Ω through the balanced output
  • Output impedance below 0.3Ω
  • PC, BT, and PHONE operating modes
  • PCM 384kHz/32-bit and native DSD256 USB decoding
  • Global 10-band parametric EQ
  • Color IPS display with Bluetooth track information
  • Detachable magnetic clip
  • Up to 11 hours of operation in PHONE mode

Specs

  • Bluetooth chip: Qualcomm QCC3095
  • Bluetooth version: 6.2
  • Bluetooth codecs: SBC, aptX, aptX Adaptive, aptX Lossless, aptX HD, LDAC, LC3
  • USB controller: SPV5048
  • DAC: ESS ES9069Q
  • Headphone amplifiers: Two ES9603Q chips
  • USB decoding: PCM up to 384kHz/32-bit, native DSD256, DoP128
  • Display: 1.3-inch (3.3cm) color IPS
  • Headphone outputs: 3.5mm single-ended, 4.4mm balanced
  • Balanced output at 32Ω: ≥460mW + 460mW, THD+N <1%
  • Single-ended output at 32Ω: ≥125mW + 125mW, THD+N <1%
  • Balanced output at 16Ω: ≥570mW + 570mW, THD+N <1%
  • Single-ended output at 16Ω: ≥210mW + 210mW, THD+N <1%
  • Frequency response: 20Hz–85kHz, attenuation <1.9dB
  • Signal-to-noise ratio: ≥124dB, A-weighted
  • Single-ended noise floor: <2.1µV, A-weighted
  • Balanced noise floor: <2.4µV, A-weighted
  • Output impedance: <0.3Ω at 32Ω
  • THD+N: <0.0009% at 1kHz/−16dB into 32Ω
  • SBC Bluetooth battery life: Up to 10 hours single-ended, 9 hours balanced
  • LDAC Bluetooth battery life: Up to 8.5 hours through either output
  • PHONE mode battery life: Up to 11 hours through either output
  • Charging time: ≤1.5 hours
  • Dimensions without clip: Approximately 2.83 × 1.38 × 0.54 inches (72 × 35 × 13.7mm)
  • Dimensions with clip: Approximately 2.83 × 1.38 × 0.87 inches (72 × 35 × 22.1mm)
  • Weight without clip: Approximately 1.62 oz (46g)
  • Weight with clip: Approximately 1.94 oz (55g)
  • Colors: Black, Retro Gold, Gradient Green

What’s included

  • FiiO BTR25
  • USB-C to USB-C data cable
  • Detachable clip
  • Quick start guide
  • After-sales service card
Apos Audio FiiO Headphone DAC/Amp FiiO BTR25 Portable DAC/Amp
FiiO BTR25 Portable DAC/Amp Sale price$109.99 USD

Price Match Guarantee

45-day Returns

Apos One-Year Transferrable Warranty

Free US Shipping