TOPPING D90SE Specs Reveal
We're still a couple of weeks out until TOPPING releases their all-new DAC, the D90SE. Until then, feast your eyes on the D90SE's specs, which have been released to us. Follow us on social or sign up for our email list to stay up-to-date with all information about the D90SE release!
D90SE Specs
USB IN
- PCM: 16-32bit / 44.1 - 768kHz
- DSD (Native): DSD64 - DSD512
- DSD (DoP): DSD64 - DSD256
- MQA: Renderer, MQA, MQA Studio
IIS IN
- PCM: 16 - 32bit / 44.1kHz - 768kHz
- DSD (Native): DSD64 - DSD1024
- DSD (DoP): DSD64 - DSD256
- MQA: Not supported
- Coax/ Opt/ AES IN
- PCM: 16 - 24bit / 44.1kHz - 192kHz
- DSD (Native): Not supported
- DSD (DoP): DSD64
- MQA: Renderer, MQA, MQA Studio
Bluetooth IN
- AAC / SBC / APTX / APTX LL / APTX HD / LDAC
Line out RCA decoding parameters (USB IN @96kHz)
- THD+N@A-wt: <0.00007% @1kHz
- THD@No-wt 90kBw: <0.0008% @20-20kHz
- SNR@A-wt: 127dB @1kHz
- Dynamic range @A-wt: 127dB @1kHz
- Frequency response
- 20Hz - 20kHz (±0.1dB)
- 20Hz - 40kHz (±0.3dB)
- Output level
- 2.1Vrms @0dBFS (4V Mode)
- 2.6Vrms @0dBFS (5V Mode)
- Noise @A-wt: <1.3uVrms
- Crosstalk: -124dB @1kHz
- Channel balance: 0.3dB
- Output impedance: 100Ω
Line out XLR decoding parameters (USB IN @96kHz)
- THD+N@A-wt: <0.00005% @1kHz
- THD@No-wt 90kBw: <0.0003% @20-20kHz
- SNR@A-wt: 134dB @1kHz
- Dynamic range @A-wt: 134dB @1kHz
- Frequency response
- 20Hz - 20kHz (±0.1dB)
- 20Hz - 40kHz (±0.3dB)
- Output level
- 4.2Vrms @0dBFS (4V Mode)
- 5.2Vrms @0dBFS (5V Mode)
- Noise @A-wt: <1.1uVrms
- Crosstalk: -139dB @1kHz
- Channel balance: 0.3dB
- Output impedance: 100Ω
- 8.7 x 6.2 x 1.7” (22.2 x 16 x 4.5cm)
