Article: Now on Apos: STAX Electrostatic Earspeakers and Energizers

Now on Apos: STAX Electrostatic Earspeakers and Energizers
STAX earspeakers and electrostatic amplifiers arrive on Apos
Six STAX electrostatic earspeakers and two dedicated amplifiers are joining the Apos lineup. The earspeaker range includes the STAX SR-X1, STAX SR-L500 MK2, STAX SR-L700 MK2, STAX SR-009D, STAX SR-009S, and STAX SR-X9000. For amplification, the STAX SRM-400S connects to an existing analog source, while the STAX SRM-D10 II combines USB digital decoding with electrostatic amplification.
SR-X1: A circular entry point
The SR-X1 brings STAX’s circular earspeaker design to the entry level of this selection at $535. Its driver mounts directly inside the enclosure, reducing the number of joints between components, while curved rear slits provide a path for sound to leave the housing. A metal frame, sheepskin pads with memory foam, and a replaceable OFC cable round out the design.
SR-L500 MK2 and SR-L700 MK2: The Lambda designs
The SR-L500 MK2 and SR-L700 MK2 use oval electrostatic drivers in STAX’s rectangular Lambda housings. Both include replaceable cables and curved aluminum case holders designed to improve rigidity and help the pads fit naturally against the sides of the head. Each has a specified frequency response of 7sHz–41kHz.
The $830 SR-L500 MK2 includes synthetic leather pads and a low-capacitance HiFC copper cable. The $1,649 SR-L700 MK2 uses sheep’s leather on the pad surfaces that contact your skin and includes a silver-coated 6N OFC cable. Both cables measure 8.2 feet (2.5m).
SR-009D: The return of the SR-009 design
The $2,890 SR-009D revisits the large circular driver and MLER electrode technology introduced with the original SR-009. MLER, short for Multi-Layer Electrode, uses thermal diffusion bonding to join photo-etched metal plates under vacuum. The construction produces a rigid, flat electrode structure while allowing sound to pass through. The SR-009D adds a replaceable cable and a revised injection-molded driver case.
SR-009S: Refined electrode construction
The $4,545 SR-009S further develops the multilayer electrode design. Additional etching smooths the edges of the electrode openings to reduce air resistance, while gold plating helps suppress electrode vibration. Machined aluminum housings secure the drivers, and rounded protective mesh reduces the influence of reflections. Its specified frequency response extends from 5Hz to 42kHz.
SR-X9000: Four-layer MLER-3 electrodes
The $6,200 SR-X9000 uses four-layer MLER-3 fixed electrodes that combine etched plates with metal mesh through thermocompression bonding. This construction addresses the rigidity challenges of thin mesh electrodes while reducing acoustic obstruction. Its diaphragm has 20% more surface area than the SR-009S diaphragm.
Angled protective mesh helps control reflections toward the driver. The SR-X9000 also includes replaceable cables in 4.9-foot (1.5m) and 8.2-foot (2.5m) lengths, allowing you to choose the length that suits your listening position.
SRM-400S: All-stage FET desktop amplification
The $1,299 SRM-400S is a solid-state electrostatic amplifier with selected FETs throughout its amplification stages. Its direct-coupled signal circuit contains no coupling capacitors. RCA and XLR inputs accommodate an external DAC or another analog source, with one input type used at a time.
Maximum output is rated at 400Vrms at 1kHz, with harmonic distortion of 0.01% or less at 1kHz and 100Vrms output. A concentric dual volume control allows individual left- and right-channel adjustment, while RCA parallel outputs provide an additional connection to other audio equipment.
SRM-D10 II: USB decoding and electrostatic amplification
The $945 SRM-D10 II combines an AKM 4493 DAC with an electrostatic headphone amplifier. Its USB-C digital input supports PCM up to 32-bit/384kHz and DSD256, while a 3.5mm analog input accepts a signal from an external DAC or player. Separate USB-C connections handle digital audio and battery charging. Its 580V DC Pro bias supply supports STAX PRO-type earspeakers.
Availability
The STAX lineup is available now on Apos.
